Part # |
Boards |
5185-8203 |
FireWire (IEEE-1394A) adapter - 3-port - For Linux operating system - (Part of A8084A) |
A5159-69001 |
Dual port PCI fast wide high voltage differential SCSI-2 adapter - Has two external very high density 68 pin connectors and two internal high density 68 pin connectors - |
A5506-69102 |
100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one PCI slot - For HP-UX operating system - (Part of |
A6825-67101 |
1000 Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one PCI slot - (Part of A6825A, A8685A, and A7061A) |
A6828-60001 |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high |
A6829-60001 |
Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high |
A7231-66520 |
SCSI backplane board - Mounts on the rear of the `Hot Pluggable` hard drive bay on the left side of the workstation |
A7231-66540 |
PCI/AGP backplane board - Motherboard for the AGP video and any PCI accessory boards - Mounts in the PCI/AGP card cage on the right side of the workstation |
A7231-66580 |
Management processor board - For controlling the system console, reset and power management functions - Includes SIO (remote, console and UPS), VGA and LAN connectors - Mounts |
A7231-69010 |
System processor board (Does NOT include the processor or processor power module) - Mounts in the bottom of the chassis |
B5509-66001 |
100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot - Includes the board, software, software license, and installation instructions - For HP-UX |
P3492-63000 |
10/100Base-T PCI network interface card with IPSec (3DES) - For Windows and Linux based systems - (Part of P3492A) |
|
Chassis Parts |
A7231-04014 |
Super 80mm tubeaxial fan - Two right most of the four fans in the workstation - Used ONLY in rack mount configurations |
A7231-04015 |
Thin 80mm fan - Mounts next to the dual fan in the workstation - Used ONLY in rackmount configurations |
A7231-04017 |
Standard 80mm fan - Three right most of the four fans in the workstation - Used ONLY in tower configurations |
A7231-04033 |
80mm dual fan - The left most of the four fans in the workstation - Used in both rackmount and tower configurations |
|
Display Devices |
A7226-69520 |
ATI FireGL4 AGP+PCI graphics card - 128MB DDR SDRAM memory - Requires one AGP and one PCI slot - For HP-UX operating system |
A7226A |
ATI FireGL4 graphics card - Extreme 3D graphics board with 128MB DDR SDRAM memory, 300MHz/30-bit palette RAMDAC, Dual DVI-I digital display outputs, and one 3-pin mini DIN stereo |
A7806-69510 |
NVIDIA Quadro2 EX graphics card (NV11GL based) - Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output - Requires one APG Slot |
A7806A |
NVIDIA Quadro2 EX graphics card (NV11GL based) - Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output - Requires one APG Slot - For |
A8049-60520 |
ATI RADEON 7000 2D graphics card - Professional 2D graphics board with 32MB DDR SDRAM memory, 300MHz RAMDAC, one analog monitor output, and one DVI-I analog/digital display output - |
A8049B |
ATI RADEON 7000 2D graphics card - Professional 2D graphics board with 32MB DDR SDRAM memory, 300MHz RAMDAC, one analog monitor output, and one DVI-I analog/digital display output - |
A8064-69520 |
NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) - High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output - Requires one |
A8064A |
NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) - High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output - Requires one |
|
Drives & Accessories |
A7231-69012 |
IDE DVD-ROM drive - 8X-max read DVD, 24X-max read CD-ROM, slim line form factor - With Carbon Black faceplate |
A7231-69014 |
IDE CD-RW/DVD-ROM drive - 12X-max write, 8X-max re-write, 8x-max read DVD, 24X-max read CD-ROM, slim line form factor - With Carbon Black faceplate |
A7835-69001 |
36GB Ultra160 Wide SCSI LVD `Hot Pluggable` hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - Plugs into the hard drive bay |
A7835A |
36GB Ultra160 Wide SCSI LVD `Hot Pluggable` hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - Comes mounted in Carbon Black drive carrier |
A7837-69001 |
73GB Ultra160 Wide SCSI LVD `Hot Pluggable` hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - Plugs into the hard drive bay |
A7837A |
73GB Ultra160 Wide SCSI LVD `Hot Pluggable` hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - Comes mounted in Carbon Black drive carrier |
A7850A |
IDE DVD-ROM drive - 8X-max read DVD, 24X-max read CD-ROM, slim line form factor - With Carbon Black faceplate |
A7851A |
IDE CD-RW/DVD-ROM drive - 12X-max write, 8x-max re-write, 8X-max read DVD, 24X-max read CD-ROM, slim line form factor -With Carbon Black faceplate |
|
Interface Devices |
A5159A |
Dual port PCI Fast Wide High Voltage Differential SCSI-2 adapter - Has two external very high density 68-pin connectors and two internal high density 68-pin connectors - |
A5506B |
100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one PCI slot - For HP-UX operating system |
A6795A |
2Gbps Tachyon XL2 PCI Fibre Channel adapter - Short wave fibre channel optical Gigabit interface converter (GBIC) - For HP-UX operating system |
A6825A |
1000 Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one PCI slot - For HP-UX operating system |
A6828A |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high |
A6829A |
Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high |
A6847A |
1000 Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one PCI slot - For HP-UX operating system |
A6875A |
Management processor board - For controlling the system console, reset and power management functions - Includes SIO (remote, console and UPS), VGA and LAN connectors - NOT |
A7059A |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high |
A7061A |
1000 Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one PCI slot - For Windows and Linux operating systems |
B5509BA |
100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot - Includes the board, software, software license, and installation instructions - For HP-UX |
P3492A |
10/100Base-T IPSec (3DES) LAN host adapter board - With one RJ-45 connector - Requires one PCI slot |
|
Memory |
A6746-69001 |
512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module - Must be installed in same size pairs (Part of A7841A) |
A6833-69001 |
256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module - Must be installed in same size pairs (Part of A7840A) |
A6834-69001 |
1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module - Must be installed in same size pairs (Part of A7842A) |
A7840A |
512MB DDR-SDRAM memory upgrade kit - Includes two 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
A7841A |
1.0GB DDR-SDRAM memory upgrade kit - Includes two 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
A7842A |
2.0GB DDR-SDRAM memory upgrade kit - Includes two 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
|
Power Supplies & Accessories |
0950-4294 |
Processor power supply (McPod II) - DC to DC converter module with power supply cable (12V DC in, 1.5V DC at 100A out) - Mounts on the system processor board - Plugs into the |
8120-1378 |
Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and |
A6874-69000 |
650W `hot swap` redundant power supply - Plugs into the front of the workstation - Can use a second supply as a redundant power supply in rackmount configurations ONLY |
A6874A |
650W `hot swap` redundant power supply - NOT supported in tower configurations |
|
Processors & Accessories |
A7231-69030 |
Intel Itanium 2 processor - 1.00GHz (McKinley, 400MHz front side bus, 3.0MB Level-3 cache) - Mounts on the system processor board - Up to 2 of the same speed processors can |
A7231-69039 |
Intel Itanium 2 processor - 900MHz (McKinley, 400MHz front side bus, 1.5MB Level-3 cache) - Mounts on the system processor board - Up to 2 of the same speed processors can |
A7845A |
Intel Itanium 2 processor upgrade - Includes one 900MHz (200MHz front side bus, 1.5MB cache) processor - Cannot intermix processor speeds within the same workstation |
A7848A |
Intel Itanium 2 processor upgrade - Includes one 1.0GHz (200MHz front side bus, 3MB cache) processor - Cannot intermix processor speeds within the same workstation |
|
Other Accessories |
A4983-60101 |
USB 3-button scrolling mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
A4983-60111 |
USB 3-button mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
A4983-65103 |
USB 3-button scrolling mouse (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector |
A6064-63001 |
Converter dongle - Short cable with a (M) DVI-I connector and a (F) 15-pin VGA connector - For connecting a VGA monitor to a DVI-I port on the graphics card - Can be used |
A7231-04018 |
Power supply interface cable (module) assembly - Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with |
A7231-63002 |
IDE CD-ROM/DVD drive data cable - Connects between the CD-ROM/DVD drive and the system processor board |
A7231-63003 |
Status panel cable - Connects between the LED status panel and the system processor board |
A7231-63004 |
Hard drive power cable - Connects between the hard drive SCSI backplane board and the system processor board |
A7231-63005 |
Six wire (three per connector) fan `Y` cable assembly - Mounts in the metal airflow fan cage - Connects between the system processor board and the right two fans (Fans 1A and |
A7231-63006 |
Twelve wire (six per connector) fan `Y` cable assembly - Connects between the system processor board and the left two fans (Fans 2 and 3) |
A7231-63017 |
SCSI cable `A` channel - Has one connector at each end - Connects between the system process board and the SCSI backplane board on the `Hot Pluggable` hard drive bay |
A7231-63018 |
SCSI cable `B` channel - Has one connector at each end - Connects between the system process board and the SCSI backplane board on the `Hot Pluggable` hard drive bay |
A7861-65101 |
USB 3-button mouse (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector |
A7861-65301 |
USB keyboard with PC-104 Layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (US-English) |
A7861-65304 |
USB keyboard with PC-105 Layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (Spanish) |
A7861-65313 |
USB keyboard with PC-105 Layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (UK-English) |
A7861-65342 |
USB keyboard with PC-104 Layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (International-English) |
A7861-65343 |
USB keyboard with PC-104 Layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (US-English) |