| Part # |
Boards |
| 5183-3418 |
Terminator board - Used in secondary processor socket for a system with only one processor |
| D2140-69004 |
NetRAID-1Si One-Channel Disk Array Controller - PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A) |
| D2968-69005 |
Remote Assistant PC Board Assembly (Canada/US) (D2968C) - with on-board Modem - When Upgrading from a D2968A/B to D2968C also Order Firmware/Software Upgrade Kit |
| D2969-69001 |
Remote Assistant Board (for Outside USA and Canada) (D2969C) - EISA Intelligent Remote Management Board with Onboard NiCad Battery, Processor, & Modem (Does NOT Include the LAM) |
| D3604-63003 |
Hot Swap` Backplane Board - for Three `Hot Swap` Drives - Mounts in the the Rear of the `Hot Swap` Drive Cage |
| D4906-69001 |
System (Mother) Board - with Super VGA Video, Ultra SCSI Controller, IDE Controller - Large Vertical Board in Center of Chassis |
| D4943-69001 |
NetRAID 3-Channel Disk Array Controller - PCI Board With 3 Internal 68 Pin and 2 External 68 Pin High Density Ultra Wide SCSI Connectors (D4943A) |
| D4992-69001 |
NetRAID-1 One-Channel Disk Array Controller - PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A) |
| D5013-63003 |
LAN Adapter - PCI 10/100TX LAN Board for NetServer (D5013A) |
| D5025-63001 |
Wide SCSI Host Adapter Board (D5025A) - Installed in PCI Socket on System Backplane Board |
| D5955-69001 |
NetRAID-3Si Three-Channel Disk Array Controller - PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A) |
| D6123-69001 |
System Backplane Board - Large Horizontal Board in Center of the NetServer - Has Sockets for Add-in ISA or PCI Boards |
| J2585-69011 |
PCI 32-bit LAN interface board - Has RJ-45 connector - Supports both EtherTwist 10Base-T and 100VG/802.12 - (J2585B, part of J3009B, part of of J3010B) |
| |
Chassis Parts |
| 5002-3748 |
Mounting tray for 5.25-inch drives - For removable media devices in the upper drive slots (P/O D2199A) |
| 5042-2108 |
Hot Swap` Bezel Assembly - Frame Around the 3 `Hot Swap` Drives |
| 5064-1954 |
System Fan - Mounted on Rear of Cabinet |
| 5064-1961 |
Front bezel assembly |
| 5064-3501 |
System Board Stiffener Bracket - Metal Bracket With Board Extractors - Mounts on of System Board |
| 5064-3531 |
Processor Fan and Bracket (P/O Some Accessory Kits) - If Installed, it is Mounted on Right Side of Processor Bracket |
| 5182-4534 |
Key - for the `Hot Swap` Drive Bezel Lock |
| C2260-60078 |
Hard Drive Mounting Tray (Dove Gray) (P/O D2198A) - for Mounting 3.5 Inch Drive in Front 5.25 Inch Slots of Chassis - Includes: Tray, Front Panel, and Status Cable with LED |
| D2198A |
Hard Drive Mounting Tray Kit (Dove Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2198B |
Hard Drive Mounting Tray Kit (Flint Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2199A |
Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws - For the |
| D3349A |
Hot Swap` Drive Module Tray Kit (Parchment White - 1/Pkg) - Add a Selected Third Party Drive in a `Hot Swap` Drive Bay Slot |
| D3349B |
Hot Swap` Drive Module Tray Kit (Quartz Gray - 1/Pkg) - Add a Selected Third Party Drive in a `Hot Swap` Drive Bay Slot |
| 5064-4688 |
Adapter - 68-pin high density female to 50-pin female - Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device - (C5710A) |
| 5184-3872 |
Adapter - 68-pin high density female to 50-pin female - Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device |
| |
Drives & Accessories |
| 5002-3748 |
Mounting tray for 5.25-inch drives - For removable media devices in the upper drive slots (P/O D2199A) |
| C1520H |
HP SureStore 2000e - External 2GB DDS (DAT) Drive - Single Ended Narrow SCSI-2 |
| C1521H |
HP SureStore 5000e - External 2/4GB DDS (DAT) Drive - Single Ended Narrow SCSI-2 |
| C1528H |
HP SureStore DAT 8i - 4/8GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| C1529H |
HP SureStore DAT 8e - 4/8GB External DAT Drive - Single Ended Narrow SCSI-2 |
| C1555B |
HP SureStore DAT 24i - 12/24GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| C1556B |
HP SureStore DAT 24e - 12/24GB External DAT Drive - Single Ended Narrow SCSI-2 |
| C1559C |
HP SureStore DAT 24x6e - 6x12/24GB External Autoloader DAT Drive - Single Ended Narrow SCSI-2 |
| C1559D |
6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1559DR |
6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1579A |
20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C1579AR |
20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C2260-60078 |
Hard Drive Mounting Tray (Dove Gray) (P/O D2198A) - for Mounting 3.5 Inch Drive in Front 5.25 Inch Slots of Chassis - Includes: Tray, Front Panel, and Status Cable with LED |
| C5647A |
HP SureStore DLT 40i - 20/40GB Internal DLT Drive - Single Ended Narrow SCSI-2 |
| C5658A |
HP SureStore DLT 70e - 70GB External DLT Drive - Single Ended Wide SCSI-2 |
| C5677B |
HP SureStore DAT 24x6i - 6x12/24GB Internal Autoloader DDS-3 (DAT) Drive - Single Ended Narrow SCSI-2 |
| C5726A |
80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| C5726AR |
80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| D2035-60282 |
1.44MB floppy disk drive (Flint Gray) - 3.5-inches, 1/3 height - (Part of D2035A/B) |
| D2035B |
1.44MB Floppy Drive (Flint Gray Bezel)- 3.5 Inch, 1/3 Height |
| D2198A |
Hard Drive Mounting Tray Kit (Dove Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2198B |
Hard Drive Mounting Tray Kit (Flint Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2199A |
Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws - For the |
| D3349A |
Hot Swap` Drive Module Tray Kit (Parchment White - 1/Pkg) - Add a Selected Third Party Drive in a `Hot Swap` Drive Bay Slot |
| D3349B |
Hot Swap` Drive Module Tray Kit (Quartz Gray - 1/Pkg) - Add a Selected Third Party Drive in a `Hot Swap` Drive Bay Slot |
| D3581-69001 |
1.05GB `Hot Swap` Hard Drive Module - Includes Attached Fast SCSI-2 Controller Board - Parchment White (P/O D3581A) |
| D3581A |
1.05GB `Hot Swap` Hard Drive Module - Includes Attached Fast SCSI-2 Controller Board - Parchment White |
| D3582-69001 |
2.1GB `Hot Swap` SCSI-2 Hard Drive Module - Dove Gray - (P/O D3582A) |
| D3582-69002 |
2.1GB `Hot Swap` Hard Drive Module - Flint Gray (P/O D3582B) |
| D3582-69004 |
2.1GB `Hot Swap` Ultra SCSI Hard Drive Module - Quartz Gray (P/O D3582C) |
| D3582A |
2.1GB `Hot Swap` Hard Drive Module - Includes Attached Fast SCSI-2 Controller Board - Dove Gray |
| D3582B |
2.1GB `hot swap` Fast SCSI-2 hard drive module - Flint Gray |
| D3582C |
2.1GB `hot swap` Ultra SCSI hard drive module - Quartz Gray |
| D3583-69000 |
4.2GB `Hot Swap` Ultra SCSI Hard Drive Module - (P/O D3583C) - Note: ONLY for Quantum Drive With Date Code XX47157XXXXX to XX47244XXXXX |
| D3583-69001 |
4.2GB `Hot Swap` SCSI-2 Hard Drive Module - Parchment White (P/O D3583A) |
| D3583-69002 |
4.2GB `Hot Swap` SCSI-2 Hard Drive Module - (P/O D3583B) - Flint Gray |
| D3583-69004 |
4.2GB `Hot Swap` Ultra SCSI Hard Drive Module - (P/O D3583C) - Note: NOT for Quantum Drtive With Date Code XX47157XXXXX to XX47244XXXXX |
| D3583A |
4.2GB `Hot Swap` Hard Drive Module - Includes Attached Fast SCSI-2 Controller Board - Parchment White |
| D3583B |
4.2GB `hot swap` fast SCSI-2 hard drive module - Flint Gray |
| D3583BR |
4.2GB `Hot Swap` Hard Drive Module - Includes Attached Fast SCSI-2 Controller Board - Flint Gray |
| D3583C |
4.2GB `hot swap` Ultra SCSI hard drive module - Quartz Gray |
| D3583CR |
4.2GB `hot swap` Ultra SCSI hard drive module - Quartz Gray |
| D4289-69001 |
9.1GB `Hot Swap` Ultra SCSI Hard Drive Module - Quartz Gray (P/O D4289A) |
| D4289A |
9.1GB `hot swap` Ultra SCSI hard drive module - Quartz Gray |
| D4383A |
24X (Max) Speed IDE CD ROM Drive with Integral Loading Tray - Uses System Board IDE Controller |
| D4389-60091 |
48x-max speed IDE CD-ROM drive (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control |
| D4903-69001 |
4.2GB, 10,000 RPM `Hot Swap` Ultra Wide SCSI Hard Drive Module - (P/O D4903A) |
| D4903A |
4.2GB, 10,000 RPM `Hot Swap` Ultra Wide SCSI Hard Drive Module |
| D4910-69001 |
Hard Drive - 4.2GB, 7200 RPM Ultra Wide SCSI (P/O D4910A) |
| D4910A |
Hard Drive - 4.2GB, 7200 RPM - Includes Attached Wide Single Ended SCSI Interface Board |
| D4911-69001 |
9.1GB, 7200 RPM Ultra Wide SCSI Hard Drive Module (P/O D4911A) |
| D4911A |
9.1GB, 7200 RPM Ultra Wide SCSI Hard Drive Module |
| D5039-69001 |
18.2GB, 7,200 RPM `Hot Swap` Ultra Wide SCSI Hard Drive Module - (P/O D5039A) |
| D5039A |
18.2GB, 7,200 RPM `Hot Swap` Ultra Wide SCSI Hard Drive Module |
| D6019-69002 |
9.1GB, 10,000 RPM `Hot Swap` Ultra Wide SCSI Hard Drive Module - (P/O D6019A) |
| D6019A |
9.1GB, 10,000 RPM `Hot Swap` Ultra SCSI Hard Drive Module |
| D7049-69001 |
9.1GB, 10,000 RPM Ultra Wide SCSI Hard Drive Module (P/O D7049A) |
| D7049A |
9.1GB, 10000 RPM Ultra Wide SCSI hard drive module |
| D7176-69001 |
Hard Drive - 18.2GB, 7200 RPM - Includes Attached Wide Single Ended SCSI Interface Board (P/O D7176A) |
| D7176A |
18.2GB, 7200 RPM Ultra Wide SCSI hard drive module |
| |
Memory |
| 1818-6527 |
512KB 50nS Video Memory IC - Plugs Into Sockets on System Processor Board - (2 or 4 Required, 1MB Kit is D4219A) - Installing 2 IC`s Will Upgrade to 2MB Total of Video Memory |
| D4219A |
1MB Video Memory Upgrade Kit - Includes Two 512KB 50nS EDO Video Memory IC`s |
| D4294-63001 |
16MB EDO DIMM Memory Module - 60nS, 72-Bit (D4294A) |
| D4294A |
16MB EDO DIMM Memory Module Upgrade - 60nS, 72 Bit (Product Includes One DIMM) |
| D4295-69001 |
32MB EDO DIMM Memory Module - 60nS, 72-Bit (D4295A) |
| D4296-69001 |
64MB EDO DIMM Memory Module - 60nS, 72-Bit (D4296A) |
| D4296A |
64MB EDO DIMM Memory Module Upgrade - 60nS, 72 Bit (Product Includes One DIMM) |
| D4297-69001 |
128MB EDO DIMM Memory Module - 60nS, 72-Bit (D4297A) |
| D4297A |
128MB EDO DIMM Memory Module Upgrade - 60nS, 72 Bit (Product Includes One DIMM) |
| D5955-63003 |
16MB SIMM for NetRAID 3Si disk array controller |
| D7132-69000 |
64MB SIMM for NetRAID 3Si disk array controller (D7132A) |
| |
Power Supplies & Accessories |
| 5064-1941 |
Power Supply Assembly, 350W - NOTE: the Fan Inside the Power Supply is not Available Separately |
| 8120-1751 |
Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
| |
Processors & Accessories |
| 5183-2471 |
Heat Sink for Pentium II Module |
| D4975-63000 |
Intel Pentium II processor - 266MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) - Does not include heat sink |
| |
Other Accessories |
| 1420-0356 |
3.0V battery (20mm diameter, 3.2mm thick, 220 mA-hr) - Type CR2032 lithium |
| 1420-0559 |
3.6V Lithium Battery - Mounts Inside Rear of Cabinet |
| 5062-3383 |
SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.0m (3.3ft) long |
| 5062-3386 |
SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 2.0m (6.6ft) long |
| 5063-1214 |
SCSI interface cable - 50 pin low density (M) bail lock to 68 pin high density (M) thumbscrew - 1.0m (3.3ft) long - (C2915A) |
| 5063-1269 |
SCSI interface cable - 50 pin low density (M) bail lock to 68 pin high density (M) thumbscrew - 2.0m (6.6ft) long - (A3401A Opt 002) |
| 5063-8400 |
Ribbon Cable - HP Remote Assistant Power Control Cable - From HP Remote Assistant Board to System Board in NetServer - Includes Two Self Adhesive Cable Clamps |
| 5064-1957 |
Serial Management Cable |
| 5182-6730 |
I2C Bus Cable Assembly (E) - 400mm Long - Between the System Backplane Board and the `Hot Swap` Backplane Board |
| 5183-2410 |
Floppy Cable (C) - From the System Backplane Board to the Floppy Drive |
| 5183-2411 |
IDE Cable (B) - From the System Backplane Board to IDE Devices |
| 5183-2412 |
Wide SCSI Cable (A) - Terminated 68 Pin Cable From System Backplane Board to up to 4 Upper-Shelf Wide SCSI Devices - Last Connector Has 68 Pin to 50 Pin Adapter for Tape Drive |
| 5183-2484 |
Wide SCSI Cable (D) - 68 Pin Cable From the System Backplane Board to the `Hot-Swap` Backplane Board - Middle Connector Has 68 Pin to 50 Pin Adapter for Tape Drive |
| 5183-2671 |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.0m (3.3ft) long |
| 5183-3488 |
Wide SCSI Cable (F) - 68 Pin Cable From the System Backplane Board to up to 2 Upper-Shelf (Non `Hot-Swap`) SCSI Devices - Has Built-in Termination |
| 8120-6147 |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long - (A3401A Opt 005, C6509A) |
| A1658-62020 |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long - (C2924A) |
| C2911A |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.9m (3.0ft) long |
| C2911C |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.0m (3.3ft) long |
| C2915A |
SCSI interface cable - 50 pin low density (M) bail locks to 68 pin high density (M) thumbscrews - 1.0m (3.3ft) long |
| C2924A |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C2924C |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 2.5m (8.2ft) long |
| C2978A |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 90 Ohms - 0.5m (1.6ft) long |
| C2978B |
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 0.5m (1.6ft) long |
| C2979A |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 90 Ohms - 1.5m (4.9ft) long |
| C2979B |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.5m (4.9ft) long |
| C2981A |
SCSI interface cable with thumbscrews on both ends - Ultra flexible 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long |
| C3726A |
SCSI Interface Cable - 68 Pin Ultra High Density (M) to 68 Pin High Density (M) - 1.0m (Has Thumbscrews on Both Ends) |
| C3751-60201 |
2 Button PS/2 Serial Mouse (Quartz Gray) - has Attached 6ft Cable with 6 Pin Mini-DIN Connector (C3751B) |
| C3751B |
2 button PS/2 serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-din connector |
| C5666A |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.9m (3.0ft) long |
| C5667A |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 1.5m (4.9ft) long |
| C5699A |
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C5743A |
Low voltage differential/Ultra2 single-ended SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C6509A |
SCSI interface cable with thumbscrews on ends - 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long |
| D2967-63214 |
7.2V NiCad Battery - Mounts on HP Remote Assistant Board |
| D3636A |
SCSI interface cable with thumbscrews on both ends - Highly flexible 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| D3636B |
SCSI interface cable with thumbscrews on both ends - Highly flexible 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| D3636C |
SCSI interface cable with thumbscrews on both ends - Highly flexible 68 pin high density (M) to 68 pin high density (M) - 90 Ohms - 2.5m (8.2ft) long |
| D3637A |
SCSI Interface Cable - 68 Pin Ultra High Density (M) to 68 Pin High Density (M) - 2.5m (Has Thumbscrews on Both Ends) - Highly Flexible |
| D3637B |
SCSI Interface Cable - 68 Pin Ultra High Density (M) to 68 Pin High Density (M) - 2.5m (Has Thumbscrews on Both Ends) - Highly Flexible |
| D4983B |
NetRAID Controller to Rack Storage/8 Cable Kit - Includes a 68 Pin Cable From Third Channel of D4943A Controller to Rear Panel and a 2.5m 68 Pin High Density Cable With Thumbscrews |
| D5955-63002 |
Backup Battery for D5955A NetRaid Disk Array Controller |
| D5968A |
Wide SCSI Cable Kit for D5025A - Internal Cable From D5025A Controller Board to Common Tray for Duplexing - Contains 1 Cable for NetServer LCII and 1 Cable for NetServer E-Series |
| D6020A |
SCSI interface cable - Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends - 68-pin ultra high density (M) to 68-pin high density (M) - |
| D8597-63001 |
Windows 95` Keyboard Assembly (Quartz Gray, 104 Key) - has Attached 2m Cable with 6 Pin Mini DIN Connector - USA English - Replacement for D4950B Opt ABA, C1405B, C1405C |
| K2285 |
SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.5m (4.9ft) long |
| K2285-60001 |
SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.5m (4.9ft) long - (K2285) |
| K2286 |
SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.0m (3.3ft) long |
| K2286-60001 |
SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.0m (3.3ft) long - (K2286) |
